Metallurgical and Materials Engineering Project Topics for Final Year Students
We Update New Topics Everyday Follow Our WhatsApp Channel for Updates on New Project TopicsFollow WhatsApp Channel
List of Metallurgical and Materials Engineering Project Topics for Final Year Students in Nigeria
- Production And Characterization Of Soft Soap From Local Potash (NGU) Or Caustic Potash Laboratory Or Commercial Grade
- Production Of Domestic Powder
- Construction Of Industrial Sieve Compartment
- Formulation And Suitability Of Water-Based Drilling Mud Using Clay From Umutu, In Ukwuani Local Government Area Of Delta State, Nigeria
- The Effect Of Particle Size On The Extraction Of Oil From Groundnut
- The Production Of Yam Flour From Yam Chips
- Construction Of Portable Wheel – Barrow
- Alternative Raw Material Sources For Cement Production
- Air Injection Studies For Enhanced Oil Recovery
- Design And Fabrication Of An Egg Incubator
- Development Of Aerosol Insecticide Using Local Raw Materials
- Construction Of A Model Shell And Tube Heat Exchanger
- Production Of Foam Using Plastic Support
- Performance Evaluation Of Downdraft Gasifier For Syngas Production Using Rice Husk
- The Kinetic Study On Hydrolysis Of Cellulose (Saw-Dust)
- Construction Of Soap Moulds, Table And Cutters
- Maintenance Of Pilot Plant Spray Dryer
- Construction Of Simple Distillation Unit
- Fabrication Of Briquette Stove
- The Construction Of Sand Filter For Portable Water Filtration With Stainless Steel Material
- Manufacture Of Ceiling Board Using Local Materials
- Estimation Of The Effect Of Nephrolepis Undulata Butanol Fraction On Glucose Absorption Across Intestinal Epithelium Of Alloxan Induced Diabetic Adult Wistar Rats
- Synthesis Of Biolubricant From Vegetable Oils
- Synthesis And Characterization Of Copper Oxide/Activated Carbon Composite Prepared From Palm Kernel
- Production And Fermentation Of Alcohol From Palm Wine
- Effect Of Liquid Flow Rate And Gas Flow Rate On A Packed Absorption Tower And Repair Of Equipment
- Production Of High Quality Liquid Air Refresher
- Production Of A High Quality Bar Soap And Compare With Detergent
- Synthesis And Characterization Of Biodegradable Polymers Derived From Yam And Cassava Peels
- Construction Of A Simple Size Reduction Machine
- Gas Flaring And It’s Effect On The Environment
- Water Purification Unit
- The Production Of Yam Flour
- Repair And Recommissioning Of Process Heat Transfer Apparatus
- Production Of Composite Using Recycling Polyethylene And Sawdust As A Filler
- Effect Of Gasification Operating Parameters On Quality Of Syngas Produced Using Sawdust Feedstock
- Design And Fabrication Of Maize Corn-On-Cob Tray Dryer
- Construction Of 2,000 Litres Capacity Water Re-Servoir
- Cardio Protective Activities Of N-Hexane Extract Of Desmodium Velutinum Stem On Albino Wistar Rat
- Effect Of Eggshell As A Filler On The Mechanical Properties Of Flexible Polyurethane Foam
- Preservation Of Palm Wine Using Ultraviolet Radiation
- Construction Of A Fluidzed Bed Reactor
- Production Of Briquette From Waste Materials Using Locally Fabricated Equipment
- Eco-Friendly Recovery Of Copper From Waste Printed Circuit Boards Using Deep Eutectic Solvents
- Design And Operation Of A Shell And Tube Heat Exchanger
- Construction Of Reading Table And A Chair
- Head Loses In Horizontal And Vertical Orificemeter, A Comparative Evaluation And Analyses With Application Of Statistical Method Of Data Reliability
- Ethanol Production From Cocoyam Peels
- Design And Fabrication Of A Double Pipe Heat Exchanger
- Glycerine Recovery From Spent Soap Lye
- Construction Of Packed Distillation Column
- Production Of Liquid And Vaporized Perfumes Using Local Materials
- Production And Characterization Of Biodiesel From Tiger Nut
- The Anti-Inflammatory Activity Of Crateva Adnsonii Dichloromethane Fraction
- Desulphurisation Kerosene
- Conversion Of Crude Palm Oil Olein To Vegetable Oil
- The Refurbishment Of Temperature Control Apparatus
- Crises Management In Industrial Environment
- The Application Of Size Reduction
- Extraction And Characterization Of Oil From Cashew Nut
- Utilization Studies Of Enugu Coal
- Construction Of Hydro Cyclone
- Synthesis Of Activated Carbon From Enugu Coal
- Refurbishing Of A Fixed And Fluidized Bed
- Dehydration Of Ethanol Water Solution Using Activated Starch
- Production Of Plant Mirror Using Local Raw Material
- Production Of Bioethanol From Elephant Grass (Pennisetum Purpureum) Stem
- Safety Concern In Liquefied Petroleum Gab Environment
- Production Of Cassava Flour Using Traditional Processing Method And Modern Processing Method
- The Rate Of Adsorption Of Palm Oil With Bituminous Coal
- Panel Painting Using Bamboo
- Production Of Alkali Using Local Raw Material
- Construction Of An Open Steam Distillation Column
- Construction Of Sheel And Tube Heat Exchanger
- Refining Of Palm Kernel Oil
- Industrial Wastewater Treatment Technology In Petroleum And Chemical Industrial
- Production Of Slow Burning Candle
- Development Of Baobab / Sisal Reinforced Low Density Polyethylene Hybrid Composite
- Comparison Of The Histological Structure Of Tongue Of A Carnivore, Cat And Some Other Vertebrates In Relation To Their Feeding Habits
- Preparation Of Soap Using Different Types Of Oils And Exploring It’s Properties
- Production Of Wood Adhesive
- Construction Of A Juice Extractor Machine
- Comparative Analysis Of Coal And Coconut Activated Carbon
- Construction Of Motorized Mixer
- Refining Of Vegetable Oil With Enugu Coal
- Biomonitoring Of The Toxicity Of Some Heavy Metals In Occupationally Exposed Workers In Nigeria
- Production Of Liquid And Vapourised Air Freshener From Local Raw Materials
- Construction Of A Standard Drawing Desk
- Nanoporous Materials: From Catalysis And Hydrogen Storage To Wastewater Treatment
- Formulation And Production Of Levera Soap
- Extraction Of Oil From Local Seed (Groundnut Seed) and Characterization
- Extraction And Characterization Of Oil From Date Seed
- Refining Of Soya Bean Oil
- Construction Of Venturimeter
- Extraction Of Silica From Rice Husk Ash
- The Potentials For A Co-Operative Thrift Credit Society In A Higher Education Institution
- Repair And Refurbishment Of A Centrifugal Pump
- Construction Of Simple Metallic Mould
- Construction Of Kerosine Cooking Stove
- The Effect Of Storage On Unrefined Vegetable Oil
- Optimization Of The Rheological Properties Of Oil Based Drilling Fluid Using Carbon Dots Obtained From Ground Nut Shell As Viscosity Control Agent
- Analysis Of Bush Pear And It’s Oil
- Production Of High Quality Foam
- A Comparative Study Of Chemical And Microwave Synthesized Activated Carborn From Corn Cob
- Water Pollution
- Effect Of Different Solvent Types On The Yield Of Oil From Avocado Pear Seed
- Construction Of A Chemical Rack, Study Apparatus
- Analysis Of Enugu Coal
- Construction Of A Steel Cupboard
- Construction Of Heat Exchanger Fabrication Of A Tube And Shell Heat Exchanger System
- Simulation Of Fluid Catalytic Cracking (FCC) Riser Using Ansys Fluent
- Report On Fabrication Of Flow Nozzle
- Temperature And Water Requirement For Leaching Of Caustic Alkali From ‘Ngu’
- Effects Of Vernonia Amygdalyna Ethyl Acetate Fraction On Intestinal Glucose Absorption In Alloxan Induced Diabetic Adult Wistar Rats
- Construction Of Industrial Wheel Barrow
- Construction Of Steel Cupboard
- Development And Use Of Nonwood Plant Fibers In Pulp And Papermaking
- Sustainable Development In Chemical Industries
- An Emission Inventory Of Pollutant
- Optimization Of A Green-Based Demulsifier Formulated With Palm Kernel Oil And Paraffin For Crude Oil Emulsion Treatment
- Production Of Plastic Materials
- Thermodynamic Modelling And Estimation Of Impact Of Operating Conditions On Carbon Monoxide (Co) Emissions In A Diesel-CNG Dual Fuel Engine
- Extraction Of Wax From Cocoa Pod
- Construction Of Air Conditioning Unit
- Design Of A Plant To Produce 60,000 Tonnes Of 2-Ethyl Hexanol From Propelene And Synthesis Gas
- Design And Construction Of A Refrigerating Unit
- Process And Quality Factors In Laundary And Toilet Soap Production
- The Effect Of Temperature On Hydrolysis Of Cellulose (Saw-Dust)
- Construction Of Industrial Mixer
- Assay Of Various Brands Of Ferrous Sulphate Tablets Using Aqueous Titrimetric Method
- The Use Of Locally Obtained Rubber Latex As Binder In Paint Formulation
- Presentation On The Construction Of “S” Liter Electric Kettle
- Construction Of Cellophane Sealing Machine
- The Construction Of Sieve Equipment
- Numerical Modelling Of The Survivability Mechanism Of Methane (CH4) In A Diesel-CNG Dual Fuel Engine’s Combustion Process
- Construction Of Turbine Mixer
- Characterization Of Some Branded Motor Oil
- Report On The Fabrication Of Sieve System
- Construction Of Soap Cutting Device
- Investigation Of Lithium Extraction From Oilfield Produced Water In Niger Delta
- Effect Of Interface On The Quality Of Petroleum Product In Multi Purpose Pipeline System
- Assessment Of Carbon Monoxide (CO) Level In Enugu Metropolis Monitoring Industrial And Residential Area
- Utilization Studies
- Determination Of The Concentration Levels Of Total Petroleum Hydrocarbons (TPH) In Soils Found In Automobile Shop
- The Effects Of The Action Of Detergent And Soap On Soil / Dirty Substance During Washing
- Construction Of A Vertical Fire Tube Boiler
- Phytochemical Analysis Of Moringa Oleifera And Azadrichta Indica Leaves
- Production Of Emulsion Paint With The Available Material
- Effect Of Spent Oil (Engine Oil) On The Physiochemical Properties Of Soil
- Construction Of A Blender
- Synthesis And Optical Characterization Of Nickel Doped Zinc Oxide Nanoparticles Using Chemical Bath Deposition Method
- Design Of A Plant To Produce 60,000 Metric Tonnes Of Vinegar From Palm Wine Per Year
- Enhancement Of Cellulosic Ethanol Production Through Aspergillus Niger Modification
- Formulation Of Perfume From Essential Oil Extracted From Lemongrass
- Production Of Cassava Of Starch From Cassava
- A Comparative Study Of Chemical And Microwave Synthesized Activated Carbon From Corn Cob
- Formulation And Production Of Alcohol From Palm Wine
- Construction Of Aluminium Wall Rack
- Construction Of A Pilot Motorised Mixer
- Factors Affecting Corrosion And Minimization Of Corrosion In Cargo Oil Tanks Using Any Artificial Network Or Linear Network
- Effect Of Particle Size On Oil Yield Using Scent Bean Seed (‘Ozaki’)
- Experimental Investigation Of Macronutrient Contents Of Cassava Leaves Composted Agricultural Soil
- A Project Report On Construction Of Industrial Sieve Compartment
- Extraction Of Formulation Of Perfume From Plant
- Design Of Plant For The Production Of 72000 Tonnes / Year Of 2- Ethylhexanol From Propylene And Synthesis Gas
- Modification Of Proto-Type Air Conditioning Unit
- Construction Of 500 Galion (2250 Litres) Water Reservoir
- Production Of Black And Brown Polish
- Design And Fabrication Of A Mango Juice Extractor
- Construction Of Aluminum Wall Rack
- Design Of Molten Salt Cooler In Process Plan For Production Of 2-7 X 104 Tonnes/Yr Of Phthalic Anhydride By Diret
- Construction Of Kerosene Cooking Stove
- The Use Of Local Pigments And Extenders For Formulation & Production Of Emulsion Paint
- Construction Of Soap Cutting Table, Soap Mould And Soap Cutters
- Construction Of Steel – Shelf
- Development And Characterization Of Self-Healing Car Paint Using Chitosan
- Bleaching Of Palm Oil Using Activated Charcoal
- Construction Of A Standard Wheel Barrow
- The Effect Of Environment On Corrosion
- Production Of Chemical Insecticides Using Neem Oil And The Processes Involved
- Simulation Of Combustion Efficiency Of Pilot Diesel In A Diesel-CNG Dual Fuel Engine
- Assessment Of Carbon Monoxide (CO) Level
- Production Of Emulsion Paint Using Dyed Cassava Starch As Pigment
- Fabrication Of Candle Mould With Twenty Four (24) Holes
- Extraction Of Oil From Watermelon Seed
- Production Of Activated Carbon From Dom Palm And Its Adsorption Performance On Heavy Metals
- The Effect Of Coriolis Force In The Vibration Of Pipeline Containing Flowing Liquid (Crude Oil)
- Polythene Automatics Sealing Machine
- Construction Of A Distillation Column With Reflex Divider And Condenser
- Construction Of Metal Shelf
- Optimization Of Activated Carbon Preparation From Corncob Wastewater Treatment
- Construction Of Flow Nozzle
- The Effect Of Temperature On Hydrolysis Of Cellulose
- Adsorption Of Palm Oil With Synthetic Adsorbent (Coal)
- The Refurbishment Of Temperate Control Apparatus
- Production Of Crude Oil- Drilling Process
- Temperature And Water Requirement For Leaching Of Caustic Alkalt From ‘Ngu”
- Extraction Of Oil From Coconut And Its Characterization
- Construction Of Vertical Fire Tube Boiler
- Removal Of Contaminants From Industrial Effluent Using Activated Corn Cob And Coconut Husk
- An Emission Inventory Of Pollutants
- Web Based Legal Practitioner Application System
- The Inhibition Efficiency Of Lasienthera Africanum As A Natural Corrosion Inhibitor
- Modification Of Surface, Physical And Chemical Properties Of Activated Carbons For Water Purification
- Determination Of Heavy Metal In Effluents From Some Selected Pharmaceutical Companies
- Selection Of Lubricating Oils For Varied Engine Performance
- Production Of Ethanol Through The Fermentation Of Reducing Sugars Resulting From The Hydrolysis Of Pretreated Sawdust (Hardwood)
- Construction Of A “Chemical Rack”
- Construction Of An Industrial Barrow
- Formulation And Comparison Of Industrial Bar Soap And Detergent
- Development Of Pilot-Scale Reactor For The Production Of Aluminium Hydroxide From Alum Derived From Kankara Kaolin For Zeolite Y Synthesis
- Morphological Study Of Sol-Gel Derived TiO2 Modified With Silver Nanoparticles For Photovoltaic Applications
- Construction Of Wheelbarrow
- Analysis Of Nitrogen Dioxide (No2) Formation Pathway In A Diesel-CNG Dual Fuel Engine
- Construction Of A Metal Rack
- Solid Waste Separation And Utilization
- Estimation Of Drilling Wastes In Oil And Gas Wells
- The Rate Of Bleaching Of Palm Oil White Coal
- Interface Monitoring And Analysis Of Pipeline And Products Marketing Company Limited
- Using Neural Network To Predict Corrosion Rate
- Desulphursation Kerosene
